I will not be processing any orders from the 24th December until January 1st 2025. So if you place a order within this time please take into account it will be delayed a few days before its processed and assembled.
Author Archives: admin
Pro Display 3.5
For anyone running my 3.5″ pro touch displays. I have a small update adding SD Card Logging using the SD Card slot on the bottom. To activate the logging touch the top left of the screen when you have a inserted card. The boot screen will display the SD card type and size. This is …
Speeduino firmware update
for the STM Pro it’s available on the WEB updaterhttps://nickz1969.github.io/web-dfu/ or through the firmwareloader app. This is the second fixes release (FP2) for the LTS 202402 firmware version. As with previous fix pack releases, this contains no new features but resolves a number of issues that have been found inline with the intended Long Term …
New Product Can Bus Wideband O2
Wideband Can Bus now available for the STM Pro ECUhttps://www.everythingfuelinjection.com/store/Wide-Band-Can-bus-p695498550
Away from office
Unfortunately I will be away from the 26th of August until approx 10th of September. Your orders will not be processes for this time and will not be manufactured until I return. Sorry for any inconvenience caused. Orders prior to this post are going to be sent tomorrow.
Speeduino Firmware 202402.1
Speeduino Firmware update 202402.1, Including Haltech CAN BUS Broadcast. I have now found a work around for the Haltech ic7 dash if anyone wants to run one on the standard 500k can bus speed using the Haltech can bus protocol. This is the first fixes release (FP1) for the LTS 202402 firmware version. As with …
I will be away may 20th – 28th.
All orders over this time will not be processed until I return and will have the normal lead time of 5-7 days.
Canbus 7″ Dash update
Shot video of the dash in action.Yes the display is a little Haltech looking as i like the layout, Also used the Haltech canbus protocol.Ive just added gear detection on the Haltech gear address but unsure if other haltech devices will output as the same as way as my ecu’s on this address.
AEM Canbus Wide Band O2
as of 20-4-24 the 202402 firmware now has RusEFU and AEM Canbus Wide Band available. so if you have an AEM canbus enabled wide band controller you can connect the can H and can L to the canbus on the STM Pro ecu and select WBO over CAN select the rusEFI WBO and both are …
New Product, Honda D16y4 Plug and Play.
First batch of the Honda Plug and Play ECU’s have arrived. I have been busy testing these on my new Honda engine bought for the project.True PNP ecu, remove the old, plug in the new and turn the key.Unplug your current ecu, Plug this one in and turn the key.You will need to connect your …